Camo Screws
Structural Screws
Framing, ledger and multiy-ply screws, multi-purpose flat head screws, multi-purpose hex head screws, truss screws.
Camo collated hidden Fasteners
Collated Composite Deck Screws specifications
For exclusive use with the CAMO® DRIVE™ Available in Brown, Gray, Tan and Stainless
· For use in 1" (26mm) thick composite, capped composite, and PVC deck boards
· Fast-starting slash point, T20 Star Drive for reduced cam-outs, cutting lead edge for a flush finish
· Available in 3 colors that match popular boards
Collated Edge Deck Screws specifications
For exclusive use with the CAMO® DRIVE™ Available in Carbon/Pro Tech and Stainless
· For use in 1" (26mm) thick treated lumber, composite, or PVC decking
· EDGE deck screws install through the edge of the deck board, leaving a fastener-free surface
· Rake tip augers material out, trimhead reduces visibility of the screw
Collated Wood Face Deck Screws specifications
For exclusive use with the CAMO® DRIVE™ Available in Green and Tan
· For use in up to 1-1/2" (38mm) thick treated lumber, cedar, redwood, and hardwood
· Rake tip augers material out, T20 Star Drive reduces cam-outs, and buglehead draws the board tight
Camo Hidden Deck fastener Clips
Starter Clip
Avoid face fastening your first grooved board by securing it with CAMO STARTER Clips.
Line up the back edge of the clip with the outside of the joist, centered with the cross-joist, then fasten the clip. Install a clip at each cross-joist; that’s it.
EDGE® Clips
Use CAMO Clips for your next Trex®, TimberTech® by AZEK®, MoistureShield®, and Fiberon® installation (just to name a few). Not only will you experience an easier install, but you’ll also gain peace of mind knowing that CAMO has your back with a comprehensive warranty.
WEDGEMETAL™ Clips
Hidden Deck Fasteners for metal framing
WEDGEMETAL Clips are for grooved wood, composite, and PVC deck board installations on metal joists.
WEDGECLIP™
Hidden Deck Fasteners for grooved wood, composite, and PVC deck board installations in any deck pattern on wood joists.
Clips are designed and warranted for use with the leading grooved deck boards
EDGEXMETAL® Clips
EDGEXMETAL Clips are for grooved wood, composite, and PVC deck board installations on metal joists
Clips are designed and warranted for use with the leading grooved deck boards
EDGEX® Clips
EDGEX Clips are for grooved wood, composite, and PVC deck board installations in any deck pattern on wood joists
Clips are designed and warranted for use with the leading grooved deck boards.
While quantites last; replaced with WEDGECLIP.
Camo Accessories
Drive, Driver Bits specifications
- T15 for Edge and Clip fastening
- T20 for Face fastening
- 2pk—both T15 or both T20
Edge Deck Screw Driver Bits specifications
For use with Pro Series Guides and Edge deck screws.
Built-in shoulder sets the automatic depth of drive for maximum holding power and prevents overdriving. Driver Bits are available for grooved and square edge boards.
Bit for grooved boards has a higher shoulder than the bit for square edge boards 3” (76mm).
T15 Star Drive Recommended installation speed is 2500 RPM 2pk; both grooved or both square edge.
Predrill Bit specifications
Recommended for use with hardwood and capped composite decking and Pro Series Guides before fastening Edge deck screws.
- 2pk
Camo Block user guide
A lightweight, heavy-duty alternative to concrete deck blocks. Can be installed on any surface, including uneven ground with a little leveling. Designed and precision-molded to fit standard lumber specifications without any chipping out of slots.
DRIVE Edge Guide
For use with CAMO DRIVE tool and Collated Edge deck screws. One Edge Guide is included with each CAMO DRIVE—it is not sold separately
Never-Miss Guide user guide
Use the Never-Miss Guide to quickly fasten EDGE™ Clips and EDGEX™ Clips. Funnel directs the driver bit onto the head of the screw for a perfect connection every time. Comes in each pail of EDGE Clips, EDGEX Clips and WEDGECLIP™; not sold separately