Highpoint peak to Peak LIghts
Installation
Installing Highpoint Deck Lights is made simple by following our step by step instructions. Installing our lights will require the use of these basic tools which may differ depending on the fixture chosen; drill, 3/8” drill bit, 3” forstner/hole saw, tape measure, writing instrument, silicone filled wire nuts, low voltage wire, Flathead and Philips screw drivers, insulated wire tacks. If you have any questions during your install, please do not hesitate to contact Highpoint Deck Lights at: 1 (888) 582-5850.Peak to Peak Up/Down Light
Antique Bronze
Textured Black
Stainless
Available Colours:
- Antique Bronze
- Textured Black
- Stainless
Dimensions:
- Size: 5-3/4" T x 3-1/4" D, 2-3/8" Diameter of fixture body. Mounting plate is 3-1/8" D and Mounting holes are 2-1/2" On Center
Brightness:
- 220 Lumens
Features/each light includes:
- 10 Watt LED
Description:
2 - 5 Watt MR16 LED Bulbs per Fixture
Peak to Peak Mini Spot Light
Textured Black
Available Colours/Finishes:
- Textured Black
Dimensions:
- Size: 3-3/4" W x 1-7/8" H x 2-3/4" D
Brightness:
- 140 Lumens
Features/each light includes:
- 1.5 Watt LED