Keeps wood looking great for many years
Proven performance on hardwoods, softwoods & thermally modified woods »Details Cutek Extreme is a full synthetic oil-based wood protection system that penetrates into the wood where it works to control moisture from within. Cutek Extreme is easy and safe to apply and will not peel or crack. It reduces splitting and cupping, with no lap marks, drips or runs.
Advanced Wood Protection
Cutek Extreme is formulated to minimize warping, cupping and splitting, which means your exterior project lasts years longer. Cutek Extreme Clear fades over time, but retains the natural wood colour, minimizing maintenance requirements for wood. With a Cutek Colourtone, the added UV protection keeps the natural colour for much longer.
IMPORTANT
Any existing film on your wood project MUST be removed completely by sanding or stripping before applying Cutek Extreme.
Old, dirty, stained or weathered timber should be prepared by first applying Cutek Proclean restoration agent, then power rinsing with a high-pressure washer set to under 750 p.s.i. (50 bar), with a fan jet pattern to avoid damage to the wood fibre. Once the timber is thoroughly dry, apply two coats of Cutek Extreme.
Wood previously coated with a film forming product such as stains, linseed oil, paint, polyurethane, etc., must first be restored with Cutek CD33 Naked paint stripper and Cutek Proclean prior to the application of Cutek Extreme. The results achieved from restoration are dramatic.
Cutek Extreme is NOT suitable for use on acetylated wood.
On NEW wood, Ensure that timber to be coated is clean and dry. Cutek Extreme can be used on treated timber, however wood with mill glaze, or pre-treated with wax and polymer processes such as LOSP may require cleaning first with Cutek Proclean.
Why would I choose Cutek Extreme for my project
Cutek Extreme is especially suitable for thermally modified wood and other alternatives to traditional hardwoods. Cutek Extreme is simple to apply, easy to maintain and cost effective. See the How to use Cutek Extreme with Wood fact sheet for or more information. Use Cutek Extreme to protect: Weatherboards, shingles, windows, doors, plywood, log buildings, beams, outdoor furniture, decking, fascia boards, shutters, garage doors, joinery, spa pools, fences, posts… in fact virtually anything made of wood.
- Easy to apply and maintain
- No sanding or stripping between coats
- Up to 2 x coverage rate of most coatings
- No waiting for wood to weather
- Precoat with clear and wet-stack before construction
- No need to wipe oil after normal application
- Highlights your timber’s natural grain and beauty
- Long term protection from moisture reduces cupping, warping and splitting
- Can be applied in direct sun, even on the hottest day
- High-quality ingredients that stand up to extreme conditions even in the tropics
- Suitable for all types of wood including engineered wood.