The CN100 is a high production tool for use where nails are required. It shoots plastic caps for residential roofing and sidewall applications. Key features include tool-free depth adjustment and an integrated switch for sequential/bumpfire capability.
The STINGER CN100 is designed for use with STINGER 1” NailPac only.

Speed: 3 cap nails per second (max. cycle rate / second)
Tool Weight: 4.9 lbs.
Fastener Capacity: 200 caps/ 200 nails
Cap Type: Full 1" plastic collated caps
Fastener Type: Full round head - electro galvanized ring shank - wire collation
Fastener Length: 1"

The CH38A delivers the holding power of a cap with the speed and ease of a hammertacker. With every swing, this airless cap system automatically advances the cap and positions it for the staple. The STINGER® CH38A is designed for use with 3/8" STINGER® StaplePac® only.

Speed: 3 cap nails per second (max. cycle rate / second)
Tool Weight: 2.9 lbs.
Fastener Capacity: 168 caps/ 168 nails
Cap Type: Full 1" plastic collated caps
Fastener Type: 3/8" crown stapleswire collation
Fastener Length: 3/8"

The CH38 is the first hammertacker to deliver a cap and staple. And it’s easy to use - just pull the trigger and drive it in! The STINGER CH38 is designed for use with 3/8” STINGER® StaplePac® only.

Speed: 3 cap nails per second (max. cycle rate / second)
Tool Weight: 2.6 lbs.
Fastener Capacity: 168 caps/ 168 nails
Cap Type: Full 1" plastic collated caps
Fastener Type: 3/8" crown staples
Fastener Length: 3/8"